We are now dealers for C. C. Manufacturing Co.'s Pocket Slipper Laser Aimer gun sights. Selling for $122.95, models are available for the LWS Seecamp .32 and .380 caliber (shown mounted on an Seecamp LWS32 in this photo), a different laser is available for each gun, due to the increased recoil of the .380 ACP, North American Arms .32 Guardian and .380 Guardian (a different model is available for each NAA Guardian), the Kel-Tec .32 P32 and .380 P3AT (the same PSLA will work on either gun), the Beretta model 3032 Tomcat and the Rohrbaugh R-9. We have tested these laser aimers and found that they are made with excellent quality and are very easy to use, the index finger of the strong hand fits in the hole in the laser aimer below the trigger guard to activate the laser beam by pressing a small switch. They are impervious to water and have a battery life of 2100 5 second activations, 3 hours of on time or a 3 year shelf life. Replacement batteries are available at camera or electronic stores and uses a Duracell #D/L1/3N and the Radio Shack p/n is 23-265. We've added the Pocket Slipper Laser Aimers to our secure order page and simply check the box by the firearm you will be installing the laser sight on to order your PSLA. They install in minutes and the only tool required is a small common blade screwdriver to tighten the screws. We now offer a discount on PSLA's to Law Enforcement Personnel, call (1-888-459-2358) or e-mail us for details.
We were recently corresponding with a SmartCarry® customer by e-mail and mentioned that we are now dealers for C. C. Mfg. Co.'s Pocket Slipper Laser Aimers. He had purchased a small size SmartCarry® for his Kel-Tec P-11 and we had no knowledge that he also owned a Kel-Tec P-32. Here are his
comments concerning the Pocket Slipper Laser Aimer:
"I will check out that website you gave me. The P-32 that lives in my pocket has a CC pocket slipper attached and I think it is the best thing since sliced bread. I will spread the word on KTOG and other places that now you are selling these devices. I don't have to think about aiming the P-32 just put the dot where I want and pull the trigger."
Steve D. - Huger, SC
Concealed Protection 3, Inc. has designed a new holster, our extra small laser (XSL) size for those firearms equipped with the C. C. Mfg. Co.'s Pocket Slipper Laser Aimer. Our first standard model XSL (extra small size with laser aimer) holster sizes have been completed, and we sent one to Mr. Steve D. of Huger, SC for testing with his Kel-Tec P32. We are grateful to Steve for testing the holster and his comments regarding the firearm pocket size, which was essential in designing the holster. We have also completed the templates for our security model XSL for PSLA equipped firearms and Jo Ann has started production on them. If you've visited our secure order page recently to place an order, you may have noticed the "For Future Use" slot for the next PSLA that C. C. Mfg. Co. builds has been changed to "Beretta 3032 Tomcat", and these are now available.
The above photos were taken by Steve who tested our new XSL holster for PSLA equipped firearms. On the left is Steve's C. C. Mfg. Co. PSLA equipped Kel-Tec P32 and on the right is the PSLA equipped P32 in our new holster size. Clicking on the left photo above will take you to the P32 page on Kel-Tec's website while clicking on the right photo above will take you to the home page of Kel-Tec's website. Safety is guaranteed by the entire trigger guard being enclosed within the firearm pocket of the holster. To order our new XSL holsters size, just click on the MasterCard/Visa logo below and specify "PSLA equipped" in the comment field when you order your SmartCarry® holster.
Shown above is a NAA (North American Arms) .380 Guardian in the new "XSL" security model holster we've designed for the smaller handguns equipped with PSLA's. The same NAA .380 Guardian is shown below on the left on top of our XSL standard model concealed carry holster and to the right the NAA .380 Guardian is shown inside the holster like it would be when the holster is worn. The pricing for the XSL holsters are the same as for our other holsters, $47.95 for the standard model and $57.95 for the security model.
Note the configuration of the PSLA for the NAA .380 Guardian. The trigger switch for the PSLA is held to the front strap of the grip with a strip of adhesive Velcro® so it can be removed if the PSLA is removed from the gun. The PSLA for the NAA .32 Guardian is identical in shape to the PSLA shown on the Kel-Tec P32 in the above photos.
Above is a Seecamp LWS380 with a Pocket Slipper Laser Aimer attached. The same PSLA will also work for the LWS32.
Shown above on the left is a North American Arms .32 Guardians with a C. C. Mfg. Co. Pocket Slipper Laser Aimer attached, photographed on top of a small size SmartCarry® concealed carry holster. To the right is the same gun with the Laser Aimer attached in the small size SmartCarry® concealed carry holster. Normally the North American Arms .32 or .380 Guardians carry in the extra small size SmartCarry®, but with the laser sight installed they both require our extra small laser size holster (not shown in this photo) as shown above the photo of the Seecamp with the NAA Guardian .380 in the holster.
We are now dealers for C. C. Manufacturing Co.'s Pocket Slipper Laser Aimer gun sights. Selling for $122.95, models are available for the LWS Seecamp .32 and .380 caliber (shown mounted on an Seecamp LWS32 in this photo), a different laser is available for each gun, due to the increased recoil of the .380 ACP, North American Arms .32 Guardian and .380 Guardian (a different model is available for each NAA Guardian), the Kel-Tec .32 P32 and .380 P3AT (the same PSLA will work on either gun), the Beretta model 3032 Tomcat and the Rohrbaugh R-9. We have tested these laser aimers and found that they are made with excellent quality and are very easy to use, the index finger of the strong hand fits in the hole in the laser aimer below the trigger guard to activate the laser beam by pressing a small switch. They are impervious to water and have a battery life of 2100 5 second activations, 3 hours of on time or a 3 year shelf life. Replacement batteries are available at camera or electronic stores and uses a Duracell #D/L1/3N and the Radio Shack p/n is 23-265. We've added the Pocket Slipper Laser Aimers to our secure order page and simply check the box by the firearm you will be installing the laser sight on to order your PSLA. They install in minutes and the only tool required is a small common blade screwdriver to tighten the screws. We now offer a discount on PSLA's to Law Enforcement Personnel, call (1-888-459-2358) or e-mail us for details.
